626 1999-2001

Exterior Lighting

Print

Headlights



Removal & Installation

CAUTION
When you install the headlight, the headlight may hit the edge of the front fender panel. This may cause scratches on the front fender panel. To avoid this, attach protective tape to the edge of the front fender panel.

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the front combination light.
  4.  
  5. Remove bolt, the connector and the headlight assembly.
  6.  
  7. Install in the reverse order of removal.
  8.  
  9. Adjust the headlight aiming.

    Click image to see an enlarged view

    Fig. Remove bolt (1), the connector (2) and the headlight assembly (3)

  10.  

Tail Lights



Removal & Installation
  1. Disconnect the negative battery cable.
  2.  
  3. Partially peel off the trunk compartment covering.
  4.  
  5. Remove the taillight assembly components in the following order

    1. Connect
     
    2. Nut
     
    3. Rear combination (taillight) assembly
     
    4. Socket
     
    5. Brake light/taillight bulb
     
    6. Backup light bulb
     
    7. Rear turn light bulb
     

  6.  
  7. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Removing the rear combination (taillight) assembly

  8.  

 
label.common.footer.alt.autozoneLogo