626 1999-2001

Brake Calipers

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the wheels. Loosen the parking brake cable adjustment from inside the vehicle.
  4.  
  5. Remove or disconnect the following:

    Parking brake cable from the cable bracket and the operating lever
     
    Flexible brake line from the caliper assembly
     
    Caliper upper mounting bolt and pivot the caliper downward. Slide the caliper off of the guide pinch
     
    Caliper
     

  6.  

To install:

  1. Lubricate the caliper pin and slide the caliper onto the guide pinch Pivot the caliper over the brake pads.
  2.  
  3. Install or connect the following:

    Brake hose to the caliper and tighten the hose nut to 16-21 ft. lbs. (22-29 Nm)
     
    Upper caliper mounting bolt and tighten the bolt to 26-28 ft. lbs. (35-39 Nm)
     
    Parking brake cable to the cable bracket and the operating lever
     

  4.  
  5. Bleed the brake system.
  6.  
  7. Install the wheels.

    Click image to see an enlarged view

    Fig. Rear disc brakes-626

  8.  

 
label.common.footer.alt.autozoneLogo