9-3 1999

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the precautions.
  2.  
  3. Remove the glove box.

    Click image to see an enlarged view

    Fig. Removing the glove box

  4.  
  5. Remove the side panel from the center console.
  6.  
  7. Remove the floor air duct.
  8.  
  9. Remove both retaining bolts from the stepping motor.
  10.  
  11. Unplug the connector.

    Click image to see an enlarged view

    Fig. Blend air door motor

  12.  

To install:

  1. Installation is the reverse of removal.
  2.  
  3. Calibrate the ACC-system by simultaneously pressing the buttons AUTO and OFF .
    WARNING
    All previous diagnostic trouble codes are erased when calibrating. Obtain readouts of stored diagnostic trouble codes before calibrating.

  4.  

2.0L Engine



  1. Before servicing the vehicle, refer to the precautions.
  2.  
  3. Remove the glove box.

    Click image to see an enlarged view

    Fig. Removing the glove box

  4.  
  5. Remove the side panel from the center console.
  6.  
  7. Remove the floor air duct.
  8.  
  9. Remove both retaining bolts from the stepping motor.
  10.  
  11. Unplug the connector.

    Click image to see an enlarged view

    Fig. Blend air door motor connector (5) and fasteners (4)

  12.  

To install:

  1. Installation is the reverse of removal.
  2.  
  3. Calibrate the ACC-system by simultaneously pressing the buttons AUTO and OFF .
    WARNING
    All previous diagnostic trouble codes are erased when calibrating. Obtain readouts of stored diagnostic trouble codes before calibrating.

  4.  

 
label.common.footer.alt.autozoneLogo