9-3 1999

2.3L L4 VIN G Std

Print

2.3L L4 VIN G Std

Trouble Code: P000A 00



Intake Cam Angle Bank 1, Control Failure

Possible Causes:



Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
 



Electrical fault in connecting leads or component.
 
Check the power supply.
 
Check the valve's control module output.
 
Check Intake Cam Angle Solenoid.
 
Replace Intake Cam Angle Solenoid.
 

Trouble Code: P0325 00



Knock detection circuit, no activity

Possible Causes:



Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
 
Check the lead.
 
Replace Ionization Detection Module CDM.
 

Trouble Code: P0705 08



Transmission Range Switch. Input Incorrect.

Possible Causes:



Checking the adjustment of the gear selector position sensor .
 

Trouble Code: P0711 00



Oil Temperature Sensor Circuit Malfunction.

Possible Causes:



Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
 
Check the gearbox with respect to oil level and oil grade.
 
Replace gearbox.
 

Trouble Code: P0971 00



Solenoid SLC2 Circuit, Short to B+

Possible Causes:



Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
 
Check the gearbox with respect to oil level and oil grade.
 
Replace gearbox.
 

Trouble Code: P1526 65



Throttle Control Malfunction

Possible Causes:



Jiggle the wiring harness at several points to detect intermittent breaks or short circuits. Check also the connector for oxidation or loose pins.
 
Check the lead.
 
Check the sensor's power supply.
 
Check the ground lead to the sensor.
 
Check the control module's sensor input/output.
 
Replace Throttle Position Sensor.
 

Trouble Code: P1611 00



Control Module not Added

Possible Causes:



See "After fitting a control module".
 

Trouble Code: P2226 03



Control Module. Internal Fault

Possible Causes:



Replace control module.
 

 
label.common.footer.alt.autozoneLogo