9-3 1999

Exhaust Manifold

Print

Removal & Installation



2.0L Engine
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Turbocharger
     
    Drive belt
     
    Steering servo pump and bracket
     
    Exhaust manifold and discard the gasket
     

  6.  
  7. Clean all mating surfaces of any residual gasket material.
  8.  

To install:

  1. Install or connect the following:

    Exhaust manifold with a new gasket and torque the bolts to 19 ft. lbs. (25 Nm)
     
    Steering servo pump and bracket
     
    Drive belt
     
    Turbocharger
     
    Negative battery cable
     

  2.  
  3. Fill the cooling system.
  4.  
  5. Start the vehicle, check for leaks and repair if necessary.
  6.  

 
label.common.footer.alt.autozoneLogo