9-3 1999

Oil Pump

Print

Removal & Installation



2.0L And 2.3L Engines
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Air cleaner and relieve the belt tension
     
    Right front wheel and inner wheel well cover
     
    Crankshaft pulley and oil pump circlip
     
    Oil pump cover and gears

    Click image to see an enlarged view

    Fig. Exploded view of the oil pump assembly 2.0L-2.3L Engines

     

  4.  

To install:

  1. Make certain that the markings on the oil pump ring gear faces outward and check the condition of the O-ring, replace if necessary.
  2.  
  3. Install or connect the following:

    Oil pump gears and cover
     
    Oil pump circlip with the chamfer facing outward and the opening facing downward
     
    Crankshaft pulley and torque the bolt to 130 ft. lbs. (175 Nm)
     
    Right front inner wheel well and front tire
     
    Air cleaner and tension the drive belt
     
    Negative battery cable
     

  4.  

 
label.common.footer.alt.autozoneLogo