9-3 1999

Support Arm

Print

Removal & Installation



  1. Remove or disconnect the following:

    Front wheel
     
    Sway bar
     
    Ball joint
     
    Support arm to suspension arm bolt
     
    Support arm to subframe bolt
     

  2.  
  3. Pry out support arm
  4.  

To install:

  1. Install or connect the following:

    Support arm to subframe bolt and torque the bolt to 74 ft. lbs. (100 Nm) plus 75 to 90°
     
    Support arm to suspension arm bolt and torque the bolt to 68 ft. lbs. (92 Nm)
     
    Ball joint and torque the nut to 55 ft. lbs. (75 Nm)
     
    Sway bar and torque the nut to 89 inch lbs. (10 Nm)
     
    Wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo