9-3 1999

CV-Joints

Print

Overhaul



  1. Secure the driveshaft assembly in a vice
  2.  
  3. Remove or disconnect the following:

    Clamps and rubber boot
     
    Circlip
     

  4.  
  5. Tap the CV joint off the axle and take care not to damage splines
  6.  
  7. Rotate inner bearing to facilitate removal of steel balls and cage from outer race
  8.  

To install:

  1. Install or connect the following:

    New rubber boot onto shaft
     
    Inner bearing into outer race. Rotate so that steel balls can be inserted and pack with 80 grams Molycote Rapid G grease.
     
    Press joint assembly onto shaft
     
    Circlip
     
    Rubber boot retaining clamps
     

  2.  

 
label.common.footer.alt.autozoneLogo