9-3 1999

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the precautions.
  2.  
  3. Remove the ACC unit.
  4.  
  5. Remove both retaining bolts from the stepping motor.
  6.  
  7. Unplug the connector.

    Click image to see an enlarged view

    Fig. Mode stepper motor location showing fasteners (2) and connector (3)

  8.  

To install:

  1. Installation is the reverse of removal.
  2.  
  3. Calibrate the ACC-system by simultaneously pressing the buttons AUTO and OFF .
    WARNING
    All previous diagnostic trouble codes are erased when calibrating. Obtain readouts of stored diagnostic trouble codes before calibrating.

  4.  

 
label.common.footer.alt.autozoneLogo