9-3 1999

Windshield Washer Systems

Print

Removal & Installation



Washer Motor
  1. Before servicing the vehicle, refer to the precautions.
  2.  
  3. Empty the reservoir.
  4.  
  5. Remove the filler pipe and the plastic nut.
  6.  
  7. Raise and safely support the vehicle.
  8.  
  9. Remove the wing liner at the front (3 screws).
  10.  
  11. Remove the pump and the level sensor from the reservoir and let them hang by their respective hoses and leads.
  12.  
  13. Remove the 2 retaining screws from the reservoir and pull the washer fluid reservoir downwards.

    Click image to see an enlarged view

    Fig. Washer reservoir and pump

  14.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo