AMC Coupes/Sedans/Wagons 1975-1988 Repair Information
REMOVAL & INSTALLATION
Remove the hold-down screws from the battery box. Loosen the nuts that secure the cable ends to the battery terminals. Lift the battery cables from the terminals with a twisting motion.
If there is a battery cable puller available, make use of it. Lift the battery from the vehicle.
Before installing the battery in the vehicle, make sure that the battery terminals are clean and free from corrosion. Use a battery terminal cleaner on the terminals and on the inside of the battery cable ends. If a cleaner is not available, use a heavy sandpaper to remove the corrosion. A mixture of baking soda and water will neutralize any acid. Place the battery in the vehicle. Install the cables on the terminals. Tighten the nuts on the cable ends. Smear a light coating of grease on the cable ends and the tops of the terminals. This will prevent buildup of oxidized acid on the terminals and the cable ends. Install and tighten the nuts of the battery box.