AMC Coupes/Sedans/Wagons 1975-1988 Repair Information

Regulator

Print

REMOVAL & INSTALLATION



The regulator is sealed at the factory and thus cannot be adjusted. It is mounted to the fender well inside the engine compartment. To remove it, simply unplug it and remove the sheet metal screws holding it in place.

See Figures 1, 2, 3 and 4

Click image to see an enlarged view

Fig. Fig. 1: Unfasten the electrical connection retaining nut ...



Click image to see an enlarged view

Fig. Fig. 2: ... then disengage the electrical connection from the starter motor



Click image to see an enlarged view

Fig. Fig. 3: Unfasten the starter motor retaining bolts ...



Click image to see an enlarged view

Fig. Fig. 4: ... then remove the starter motor from the vehicle

 
label.common.footer.alt.autozoneLogo