REMOVAL & INSTALLATION
See Figures 1 through 10
Fig. Fig. 1: Exploded view of the door componentsGremlin, Hornet, Concord, AMX and Eagle
Fig. Fig. 2: Use an Allen wrench to remove the window handle retainer ...
Fig. Fig. 3: ... then remove the handle from the door panel
Fig. Fig. 4: Remove the trim piece to gain access to the arm rest retaining screws
Fig. Fig. 5: Use a screwdriver to remove the screws at the front of the arm rest ...
Fig. Fig. 6: ... then remove the retaining screws from the side
Fig. Fig. 7: Remove the arm rest from the door panel
Fig. Fig. 8: Remove the door panel retaining screws ...
Fig. Fig. 9: ... then pull the panel from its retaining clips
Fig. Fig. 10: Now lift the door panel up and off the door
Loosen the screws and remove the door handle and window handle.
Remove the arm rest, and, if equipped, the assist handle.
Remove the screws securing the bottom of the trim panel to the door.
Using a wide-bladed tool, carefully pry out the panel-to-door frame clips. Pry right at the clip and not between them, to avoid damaging the panel.
Remove the trim panel. Replace any damaged clips.
Installation is the reverse of removal.