REMOVAL & INSTALLATION
See Figures 1 through 11
Fig. Fig. 1: Common rear drum brake assembly
Fig. Fig. 2: Use a brake tool to release the return springs ...
Fig. Fig. 3: ... then remove the return springs from the brake assembly
Fig. Fig. 4: Disengage and remove the adjuster cable assembly ...
Fig. Fig. 5: ... then remove the shoe guide plate
Fig. Fig. 6: Remove the adjuster spring ...
Fig. Fig. 7: ... then remove the adjuster lever
Fig. Fig. 8: Remove the adjusting screw assembly
Fig. Fig. 9: Using a brake tool, disengage the hold-down springs and pins ...
Fig. Fig. 10: ... then remove the spring and pin assemblies
Fig. Fig. 11: Remove the parking brake strut and spring, then remove the brake shoes
The removal and installation procedure for the rear brake shoes is similar to that for the front shoes. The only differences are: the parking brake lever must be removed from (and installed on) the secondary shoe and the parking brake strut spring assembly must be removed from (and installed), between the shoes.