Acura CL Integra NSX RL RSX TL TSX 2001-2006

Turn Signal (Combination) Switch

Print

Removal & Installation



  1. Disable the air bag system, as outlined in the Chassis Electrical Section.
  2.  
  3. Remove the lower panel of the dashboard, the knee bolster and/or the steering column covers, as necessary for your vehicle.

    Click image to see an enlarged view

    Fig. Typical combination switch location.

  4.  
  5. Disconnect the switch wiring harness by gently depressing the tab on the connector and pulling.
  6.  
  7. Remove the combination switch mounting screws, then lift our the combination switch.
  8.  
  9. Installation is the reverse of the removal procedure.
  10.  
  11. Enable the air bag system, as outlined in the Chassis Electrical Section.
  12.  

 
label.common.footer.alt.autozoneLogo