BRAKE PEDAL HEIGHT
See Figures 1, 2 and 3
- Loosen the locknuts on the brake light switch and retract it away from the brake pedal.
Loosen the brake pushrod locknut. Adjust the pedal height by screwing the pushrod in and out. The height from the floor to the back of the pedal should be:
1986-89 Integra: 7.05 in. (179 mm)
- Tighten the locknut. Check the free-play. It should be 0.039-0.196 in. (1-5mm).
- Screw the brake light switch in until the button is fully depressed and the threaded housing touches the brake pedal.
- Unscrew the brake light switch 1 / 2 turn and tighten the locknuts.