Acura Coupes and Sedans 1986-1993 Repair Guide

Brake Light Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the wire from the brake light switch mounted on the brake pedal bracket.
  2.  
  3. Loosen the locknut and unthread the switch from the bracket.
  4.  

To install:
  1. Install the switch.
  2.  
  3. Screw the brake light switch in until the button is fully depressed and the threaded housing touches the brake pedal.
  4.  
  5. Unscrew the brake light switch 1 / 2 turn and tighten the locknuts.
  6.  
  7. Connect the wire.
  8.  

 
label.common.footer.alt.autozoneLogo