REMOVAL & INSTALLATION
The Acura anti-lock brake system contains brake fluid under extremely high pressure within the pump, accumulator and modulator assembly. Do not disconnect or loosen any lines, hoses, fittings or components without properly relieving the system pressure. Use only a bleeder T-wrench 07HAA-SG00100 or equivalent to relieve pressure.Improper procedures or failure to discharge the system pressure may result in severe personal injury and/or property damage.
- Disconnect and plug the hydraulic lines from the dual proportioning valve.
- Remove the proportioning valve-to-bracket bolts and the valve from the vehicle.
- To install, reverse the removal procedures. Bleed the brake system.