Acura Coupes and Sedans 1986-1993 Repair Guide

Clutch Cable

Print

REMOVAL & INSTALLATION



  1. Release the clutch cable from the release arm by loosening the adjusting nut to allow enough slack to enable the cable to be removed from the elongated hole in the release arm.
  2.  
  3. From under the dash panel and behind the clutch pedal, remove the clevis pin that retains the clutch cable to the clutch pedal.
  4.  
  5. Remove the clutch cable holder from the firewall. Push the clutch cable through the grommet, if equipped, or squeeze the cable retaining clip and push or pull the cable through the firewall to remove it.
  6.  

To install:
  1. Install the cable through the firewall and seat the retaining clip, if equipped.
  2.  
  3. Connect the cable to the pedal.
  4.  
  5. Connect the cable to the release arm and adjust the free-play.
  6.  

 
label.common.footer.alt.autozoneLogo