Acura Coupes and Sedans 1986-1993 Repair Guide

Set/Resume Control Switch

Print

REMOVAL & INSTALLATION



Integra
  1. Disconnect the negative battery cable. Remove steering wheel.
  2.  
  3. Remove the wheel covers by removing the screws.
  4.  
  5. Unplug switch connectors, remove the retaining screws and remove SET/RESUME switch from steering wheel.
  6.  
  7. Installation is the reverse of removal. Install a new self-locking steering wheel nut and torque it to 36 ft. lbs. (50 Nm).
  8.  

Legend & Vigor

The switches on the steering wheel can be removed by prying off the cover and removing the screws. Make sure the ignition switch is in the OFF position.

 
label.common.footer.alt.autozoneLogo