Acura Coupes and Sedans 1986-1993 Repair Guide

RECEIVER UNIT

Print

REMOVAL & INSTALLATION



1986-89 Integra

See Figures 1, 2 and 3



Click image to see an enlarged view

Fig. Fig. 1: Receiver terminal identifications-1986-89 Integra



Click image to see an enlarged view

Fig. Fig. 2: Receiver removal-1986-89 Integra



Click image to see an enlarged view

Fig. Fig. 3: Equalizer removal-1986-89 Integra

  1. Remove the ashtray and holder to expose the screws under the receiver unit.
  2.  
  3. Remove the 2 screws and pull the unit out.
  4.  
  5. Disconnect the harness plugs and remove the unit.
  6.  
  7. Install in reverse order. Enter the security code.
  8.  

1990-93 Integra

See Figures 4 and 5



Click image to see an enlarged view

Fig. Fig. 4: Receiver terminal identifications-1990-93 Integra



Click image to see an enlarged view

Fig. Fig. 5: Receiver removal-1990-93 Integra

  1. Remove the console.
  2.  
  3. Remove the 2 screws and pull the unit out.
  4.  
  5. Disconnect the harness plugs and remove the unit.
  6.  
  7. Install in reverse order. Enter the security code.
  8.  

1986-90 Legend

See Figure 6



Click image to see an enlarged view

Fig. Fig. 6: Receiver terminal identifications-1986-90 Legend

  1. Remove the console.
  2.  
  3. Remove the 6 screws holding the center instrument panel assembly. Pull the unit forward and disconnect the wiring harness plugs.
  4.  
  5. Remove the 2 screws holding the receiver to the center instrument panel. Remove the unit.
  6.  
  7. Install in reverse order. Enter the security code.
  8.  

1991-93 Legend

See Figures 7, 8 and 9



Click image to see an enlarged view

Fig. Fig. 7: Receiver terminal identifications-1991-93 Legend



Click image to see an enlarged view

Fig. Fig. 8: Amplifier terminal identifications. The amplifier is mounted under the rear seat-1991-93 Legend



Click image to see an enlarged view

Fig. Fig. 9: Remove the 2 screws to pull out the receiver-1991-93 Legend

  1. Remove the console.
  2.  
  3. Remove the 2 screws holding the receiver to the center instrument panel. Do not drop the screws into the dash. Remove the unit.
  4.  
  5. Install in reverse order. Enter the security code.
  6.  

Vigor

See Figures 10 and 11



Click image to see an enlarged view

Fig. Fig. 10: Receiver terminal identifications-Vigor



Click image to see an enlarged view

Fig. Fig. 11: Amplifier terminal identifications-Vigor

  1. Remove the console, heater control panel and ashtray.
  2.  
  3. Remove the 4 screws holding the radio panel assembly. Pull out and disconnect the leads.
  4.  
  5. Remove the bolts for the receiver and amplifier.
  6.  
  7. Install in reverse order. Enter the security code.
  8.  

 
label.common.footer.alt.autozoneLogo