Acura Coupes and Sedans 1986-1993 Repair Guide

Injector Resistor

Print

REMOVAL & INSTALLATION



See Figures 1, 2, 3 and 4



Click image to see an enlarged view

Fig. Fig. 1: Injector resistor mounting and testing-Integra



Click image to see an enlarged view

Fig. Fig. 2: Injector resistor mounting and testing-1986-90 Legend



Click image to see an enlarged view

Fig. Fig. 3: Injector resistor mounting and testing-1991-93 Legend



Click image to see an enlarged view

Fig. Fig. 4: Injector resistor mounting and testing-Vigor

  1. Switch the ignition OFF .
  2.  
  3. The resistor is located in the engine compartment. On 1986-1990 Legend, it is on the right side firewall; on Vigor and 1991-93 Legends, it is on the left shock tower. On Integra, look for it on the left firewall near the fender. Disconnect the wiring connector to the resistor.
  4.  
  5. Remove or disconnect any wiring harness clamps or retainers holding the resistor harness.
  6.  
  7. Remove the retaining bolts holding the resistor; remove the resistor.
  8.  
  9. Reassemble in reverse order.
  10.  

 
label.common.footer.alt.autozoneLogo