Acura Coupes and Sedans 1986-1993 Repair Guide

Signal & Marker Lights

Print

REMOVAL & INSTALLATION



Front Turn Signals & Parking Lights
  1. Remove the mounting screws. On vehicles equipped with retracting headlights, the lights may need to be raised to access the mounting screws.
  2.  
  3. Pull the light assembly out of the body.
  4.  
  5. Rotate and remove the bulb holder and bulb.
  6.  
  7. Install in reverse order. Be sure to seat the assembly correctly and against the bumper seal on vehicles so equipped.
  8.  

Rear Light Assemblies
  1. Remove the trunk or hatch trim from in front of the lamp assembly.
  2.  
  3. Remove the mounting nuts and pull the assembly out.
  4.  
  5. Rotate and remove the bulb holder and bulb.
  6.  
  7. Install in reverse order. Be sure to seat the assembly correctly.
  8.  

High Mount Brake Light
  1. Remove the mounting screws for the light housing.
  2.  
  3. Pull the housing down and off.
  4.  
  5. Disconnect the wiring. Remove the bulb.
  6.  
  7. Install the new bulb and the housing. Install the mounting screws.
  8.  

 
label.common.footer.alt.autozoneLogo