REMOVAL & INSTALLATION
See Figures 1 through 5
Fig. Fig. 1: Back-up light switch location-1986-89 Integra
Fig. Fig. 2: Back-up light switch location-1990-93 Integra
Fig. Fig. 3: Back-up light switch location, shown with transaxle removed for disassembly-1986-90 Legend
Fig. Fig. 4: Back-up light switch location-1991-93 Legend
Fig. Fig. 5: Back-up light switch location-Vigor
Disconnect the harness connection. Remove the switch harness from the retaining clips.
Unscrew the switch from the transmission housing. Be ready to catch any lubricant that drips out.
Replace the crush washer on the switch. Install in the transaxle. Torque to 18 ft. lbs. (25 Nm).