Acura Coupes and Sedans 1994-2000 Repair Information

Speakers

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

Click image to see an enlarged view

Fig. Fig. 1: Removing an Acura door mounted speaker



Click image to see an enlarged view

Fig. Fig. 2: Note how this old, dry rotted speaker has torn away from the foam rubber that keeps the paper cone suspended. At this point the only cure is to replace the entire speaker; if not sound quality will suffer

  1. Disconnect the negative battery cable.
  2.  
  3. Remove any necessary paneling to gain access to the speaker.
  4.  
  5. Remove the protective mesh grill if applicable.
  6.  
  7. Unfasten the speaker mounting screws.
  8.  
  9. Pull the speaker partially up, then detach the electrical connector.
  10.  

See Figure 3

Click image to see an enlarged view

Fig. Fig. 3: Detach the wiring harness from the rear of the speaker

  1. Remove the speaker from the vehicle.
  2.  

See Figure 4

Click image to see an enlarged view

Fig. Fig. 4: Remove the plastic baffle from the speaker

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo