REMOVAL & INSTALLATION
See Figures 1 and 2
- Disconnect the negative battery cable.
- Remove the door panel, as outlined later in this section.
- Remove the screw cover and the retaining screw for the mirror cover.
- Unplug the connector for the power mirror.
- Unfasten the three mirror retaining screws, then remove the mirror.
- Place the mirror into position and install the retaining screws.
- Attach the connector for the power mirror.
- Install the mirror cover, retaining screw, and screw cover.
- Install the door panel, as outlined later in this section.
- Connect the negative battery cable.