Acura Coupes and Sedans 1994-2000 Repair Information

Side Sill Panel

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

Click image to see an enlarged view

Fig. Fig. 1: Remove the screws from the under side of the side sill panel



Click image to see an enlarged view

Fig. Fig. 2: Pulling the side sill panel away from the rear wheel well



Click image to see an enlarged view

Fig. Fig. 3: View of side sill panel and retaining clips

  1. Remove the side sill panel by removing the necessary screws from the front and rear wheel wells.
  2.  
  3. Slide the panel forward and remove.
  4.  
  5. To remove the side sill panel clips, turn them 45°.
  6.  

To install:
  1. Slide the clips onto the side sill panel.
  2.  
  3. Install the panel on the car by aligning the clips with the holes in the cars body.
  4.  
  5. Press lightly to ensure the clips have fully seated in the body.
  6.  
  7. Install the screws that were removed from the wheel well.
  8.  

 
label.common.footer.alt.autozoneLogo