Acura Coupes and Sedans 1994-2000 Repair Information

FIRING ORDERS

Print

To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.

If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason, it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes to reflect how your engine is wired.

See Figures 1 through 6

Click image to see an enlarged view

Fig. Fig. 1: 1.8L (B18B1 and B18C1) Engines Firing order: 1-3-4-2 Distributor rotation: Clockwise



Click image to see an enlarged view

Fig. Fig. 2: 2.2L (F22B1) and 2.3L (F23A1) Engines Firing order: 1-3-4-2 Distributor rotation: Clockwise



Click image to see an enlarged view

Fig. Fig. 3: 2.5L (G25A4) Engine Firing order: 1-2-4-5-3 Distributorless ignition system



Click image to see an enlarged view

Fig. Fig. 4: 3.0L (C30A1) Engine Firing order: 1-4-2-5-3-6 Distributorless ignition system (one coil per cylinder)



Click image to see an enlarged view

Fig. Fig. 5: 3.0L (J30A1) Engine Firing order: 1-4-2-5-3-6 Distributor rotation: Counterclockwise



Click image to see an enlarged view

Fig. Fig. 6: 3.2L and 3.5L Engines Firing order: 1-2-3-4-5-6 Distributorless Ignition System

 
label.common.footer.alt.autozoneLogo