Acura Coupes and Sedans 1994-2000 Repair Information

Instrument Cluster

Print

REMOVAL & INSTALLATION Integra



  1. Disconnect the negative battery cable.
  2.  
  3. Lower the steering column.
  4.  
  5. Remove the screws.
  6.  
  7. Detach any necessary retaining clips.
  8.  
  9. Remove the instrument cluster as an assembly.
  10.  
  11. Installation is the reverse of the removal procedure.
  12.  

CL

  1. Disconnect the negative battery cable.
  2.  
  3. Lower the steering column.
  4.  
  5. Remove the cruise control master switch.
  6.  
  7. Remove the panel brightness controller.
  8.  
  9. Remove the retaining screws.
  10.  
  11. Detach any necessary clips.
  12.  
  13. Remove the instrument cluster as an assembly.
  14.  
  15. Installation is the reverse of the removal procedure.
  16.  

See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the dashboard/steering column lower cover mounting

RL

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the center air vent from the dash.
  4.  
  5. Remove the climate control unit and audio unit as a unit.
  6.  
  7. Remove the dashboard lower cover.
  8.  
  9. Remove the drivers switch trim.
  10.  
  11. Remove the screws and clips.
  12.  
  13. Carefully pull out the instrument panel in the numbered sequence seen in the included art.
  14.  

See Figure 2

Click image to see an enlarged view

Fig. Fig. 2: Instrument cluster retaining clips and related components

Legend

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the dashboard lower cover.
  4.  
  5. Remove the instrument cluster.
  6.  

See Figure 3

Click image to see an enlarged view

Fig. Fig. 3: Instrument panel/cluster removal

  1. Installation is the reverse of the removal procedure.
  2.  

BULB REPLACEMENT



See Figures 4 and 5

Click image to see an enlarged view

Fig. Fig. 4: Turn the socket counterclockwise to remove it



Click image to see an enlarged view

Fig. Fig. 5: Pull the bulb straight out to remove it

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument cluster as outlined in this section.
  4.  
  5. Turn the desired bulb socket counter clockwise to remove it from the cluster.
  6.  
  7. Grasp the bulb and pull it straight out to remove it from the socket.
  8.  

To install:
  1. Place a new bulb into the socket and lightly press it into place.
  2.  
  3. Place the socket into the cluster and turn the socket clockwise to engage it into the cluster.
  4.  
  5. Install the instrument cluster.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo