Acura Coupes and Sedans 1994-2000 Repair Information

Seats

Print

REMOVAL & INSTALLATION




WARNING
When removing the seats, be careful not the damage the covers or tear the seams.Front

  1. Slide the seat forward. If necessary, remove the seat track end/bolt covers.
  2.  
  3. Remove the attaching bolts.
  4.  
  5. Slide the seat rearward.
  6.  
  7. Remove the seat track end covers.
  8.  
  9. Remove the attaching bolts.
  10.  
  11. Lift the seat and then detach the seat belt switch wiring harness.
  12.  
  13. Remove any other wiring harnesses such as the one for the seat heaters if equipped.
  14.  
  15. Carefully remove the seat through the front door.
  16.  
  17. Installation is the reverse of the removal procedure.
  18.  

Rear

INTEGRA
  1. Fold the seat backward using caution not to harm the seat cover.
  2.  
  3. Remove and fold up the trunk mat.
  4.  
  5. Remove the clip from the seat back hinge.
  6.  
  7. Push the seat backwards to disengage it from the hinge.
  8.  
  9. Remove the one (1) bolt that secures the seat bottom and remove it.
  10.  

It may be necessary to remove the seat latch from the seat back. The striker can also be removed at this time.


WARNING
Wear gloves to remove the seat latch and striker. This will prevent your hands from getting dirty and minimize the risk of damage to the upholstery.

EXCEPT INTEGRA

For rear seat removal and installation, please refer to the accompanying figures.

See Figures 1, 2 and 3

Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the rear seat mounting-2.3CL shown



Click image to see an enlarged view

Fig. Fig. 2: Rear seat removal and installation-3.2T shown



Click image to see an enlarged view

Fig. Fig. 3: Exploded view of the rear seat mounting-3.5RL shown

 
label.common.footer.alt.autozoneLogo