Acura Coupes and Sedans 1994-2000 Repair Information

Throttle Body

Print

REMOVAL & INSTALLATION



See Figures 1, 2, 3 and 4

Click image to see an enlarged view

Fig. Fig. 1: View of typical Acura throttle body



Click image to see an enlarged view

Fig. Fig. 2: Disassembled view of the throttle body



Click image to see an enlarged view

Fig. Fig. 3: Exploded view of throttle body and fast idle thermo valve



Click image to see an enlarged view

Fig. Fig. 4: Periodic cleaning of the throttle body is recommended

  1. Remove the negative battery cable.
  2.  
  3. Remove the air duct from the throttle body.
  4.  
  5. If working on a Legend model with traction control, remove the Traction Control Solenoid (TCS) assembly.
  6.  
  7. Remove the wiring harness connector from the throttle body.
  8.  
  9. Label and detach all vacuum hoses from the throttle body.
  10.  
  11. Detach the accelerator cable.
  12.  
  13. Detach the coolant hoses from the throttle body.
  14.  
  15. Remove the mounting nuts and/or bolts.
  16.  
  17. Remove the throttle body gasket.
  18.  
  19. Using a plastic scraper, remove any gasket material from the throttle body and air intake plenum.
  20.  
  21. Installation is the reverse of the removal procedure.
  22.  

 
label.common.footer.alt.autozoneLogo