Acura Coupes and Sedans 1994-2000 Repair Information

Windshield Wiper Blade and Arm

Print

REMOVAL & INSTALLATION



  1. With the wipers on, turn the ignition OFF when the wiper is at the mid-wipe position. At the tip of the blade assembly, mark the windshield with a crayon to aid in reassembly.
  2.  
  3. Lift the wiper arm assembly from the windshield and pull the retaining latch out.
  4.  
  5. Lift the wiper arm assembly from the transaxle driveshaft.
  6.  
  7. Disconnect the washer nozzle hose from the end of the wiper arm.
  8.  
  9. If necessary, remove the blade as outlined in General Information and Maintenance of this guide.
  10.  

To install:
  1. Connect the washer hose to the end of the wiper arm.
  2.  
  3. Position the wiper arm assembly on the transaxle driveshaft.
  4.  
  5. Push the retaining latch in to lock the wiper arm in position, then carefully lower the wiper arm and blade onto the windshield.
  6.  

 
label.common.footer.alt.autozoneLogo