Acura_MDX_2001-2006

Ignition Coils

Print

Removal & Installation



  1. Remove the intake manifold cover (A) and ignition coil cover (B).

    Click image to see an enlarged view

    Fig. Remove the intake manifold cover (A) and ignition coil cover (B)

  2.  
  3. For 2001-02 models, disconnect the Intake Manifold Runner Control (IMRC) actuator connector (A), then remove the IMRC actuator (B).

    Click image to see an enlarged view

    Fig. Disconnect the IMRC actuator connector (A), then remove the IMRC actuator (B)-2001-02 models

  4.  
  5. For 2003-06 models, disconnect the ignition coil connector (A).

    Click image to see an enlarged view

    Fig. For 2003-06 models, disconnect the ignition coil connector (A), then remove the ignition coils (B)

  6.  
  7. Remove the ignition coils.
  8.  
  9. Install the ignition coils in the reverse order of removal. Tighten to 8.7 ft. lbs. (12 Nm).

    Click image to see an enlarged view

    Fig. Tighten the ignition coil bolts as shown

  10.  

 
label.common.footer.alt.autozoneLogo