Acura_MDX_2001-2006

Valve (Rocker Arm) Covers

Print

Removal & Installation



2001-02 Models
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Air intake tube
     
    Ignition coil covers
     
    Intake manifold cover
     
    Intake manifold
     
    Valve cover
     

  4.  

To install:

  1. Install or connect the following:

    Valve covers
     
    Intake manifold
     
    Intake manifold cover
     
    Ignition coil covers
     
    Air intake tube
     
    Negative battery cable
     

  2.  
  3. Start the engine and check for leaks.
  4.  

2003-06 Models
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Intake manifold cover
     
    Ignition coil covers
     
    Ignition coils
     
    Dipstick
     
    2 bolts attaching the harness holder
     
    Positive Crankcase ventilation (PCV) hose
     
    Injector electrical connections
     
    Power steering hose bracket bolt and the harness holder bolts
     
    Harness clamps and the breather hose
     
    Valve cover
     

  4.  

To install:

  1. Install or connect the following:

    Valve covers
     
    Harness clamps and the breather hose
     
    Power steering hose bracket bolt and the harness holder bolts
     
    Injector electrical connections
     
    PCV hose
     
    2 bolts attaching the harness holder
     
    Dipstick
     
    Ignition coils and torque the retainers to 9 ft. lbs. (12 Nm)
     
    Ignition coil covers
     
    Intake manifold cover
     
    Negative battery cable
     

  2.  

 
label.common.footer.alt.autozoneLogo