Acura_MDX_2001-2006

Lower Control Arm

Print

Control Arm Bushing Replacement



The control arm bushings are serviced with the control arms as an assembly.

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Lower ball joint
     
    Front inner flange bolt
     
    Rear inner flange bolt
     
    Lower control arm
     

  4.  

To install:


NOTE
Use a new split pin for assembly.

  1. Install or connect the following:

    Lower control arm. Tighten the inner flange bolts to 69 ft. lbs. (93 Nm).
     
    Lower ball joint. Tighten the nut to 43-51 ft. lbs. (59-69 Nm).
     
    Front wheel
     

  2.  
  3. Check the wheel alignment and adjust as necessary.
  4.  

 
label.common.footer.alt.autozoneLogo