Acura_MDX_2001-2006

Fuel Pump

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Driver-s side second row seat and cut the carpet along the dotted line. Be careful not to cut the wiring harness under the carpet.
     
    Access panel
     
    Fuel pump module wiring connector
     
    Fuel supply and return lines
     
    Fuel pump locknut using tool 07AAA-S0XA100
     
    Fuel pump module
     

  6.  

To install:

  1. Install or connect the following:

    Fuel pump module. Use a new seal and align the matchmarks.
     
    Fuel pump locknut and tighten to 69 ft. lbs. (93 Nm).
     
    Fuel supply and return lines
     
    Fuel pump module wiring connector
     
    Access panel
     
    Carpet and seat
     
    Negative battery cable
     

  2.  
  3. Start the engine and check for leaks.
  4.  

 
label.common.footer.alt.autozoneLogo