Alero, Grand Am 1999-2005

Filling The ABS System

Print

The master cylinder reservoirs must be kept properly filled to prevent air from entering the system. No special filling procedures are required because of the anti-lock system.


WARNING
Do NOT allow brake fluid to spill on or come in contact with the vehicle's finish as it will remove the paint. In case of a spill, immediately flush the area with water.

When adding fluid, use only DOT 3 fluid; the use of DOT 5 or silicone fluids is specifically prohibited. Use of improper or contaminated fluid may cause the fluid to boil or cause the rubber components in the system to deteriorate. Never use any fluid with a petroleum base or any fluid which has been exposed to water or moisture.

 
label.common.footer.alt.autozoneLogo