Alero, Grand Am 1999-2005

Removal & Installation

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the screws securing the cluster trim plate to the instrument panel.
  4.  
  5. Tilt the top of the cluster trim plate downward releasing the clips that mount the bottom of the trim plate to the dash. Remove the trim plate.
  6.  
  7. Remove the screws attaching the accessory trim center plate to the dash.
  8.  
  9. Tilt the top of accessory trim plate downward releasing the clips that mount the bottom of the plate to the instrument panel. Remove the plate.
  10.  
  11. Remove the screws attaching the control assembly to the dash.
  12.  
  13. Remove the control assembly from the dash.
  14.  
  15. Disconnect the control assembly electrical connectors.
  16.  
  17. Remove the control assembly.
  18.  

To install:

  1. Install the control assembly.
  2.  
  3. Connect the control assembly electrical connectors.
  4.  
  5. Install the control assembly attaching screws.
  6.  
  7. Push the mounting clips into place and roll the top of the accessory trim plate upward into position.
  8.  
  9. Install the screws attaching the accessory trim plate to the dash.
  10.  
  11. Push the mounting clips into place and roll the top of the cluster trim plate upward into position.
  12.  
  13. Install the screws attaching the cluster trim plate to the instrument panel.
  14.  
  15. Connect the negative battery cable.
  16.  

 
label.common.footer.alt.autozoneLogo