Alero, Grand Am 1999-2005

Removal & Installation

Print

Ignition Coil Housing Assembly



2.2L Engine
  1. Remove the accelerator and cruise control cables from the bracket, if equipped.
  2.  
  3. Remove the bracket.
  4.  
  5. Remove the Ignition Control Module (ICM).
  6.  
  7. Remove the ignition coil housing retaining bolts.
  8.  
  9. Remove the ignition coil housing from the camshaft cover.

    Click image to see an enlarged view

    Fig. Exploded view of the ignition coil housing

  10.  

To install:

  1. Install the ignition coil housing to the camshaft cover.
  2.  
  3. Install the ignition coil housing retaining bolts. Tighten to 89 inch lbs. (10 Nm).
  4.  
  5. Install the ICM.
  6.  
  7. Install the accelerator and cruise control cables bracket.
  8.  
  9. Install the accelerator and cruise control cables bracket bolts and tighten to 89 inch lbs. (10 Nm). Install the accelerator and cruise control cables to the bracket.
  10.  

 
label.common.footer.alt.autozoneLogo