Alero, Grand Am 1999-2005

Torsion Bar

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Torsion bar-to-knuckle bolt, washer and bushing
     
    Torsion bar-to-chassis bolt
     
    Torsion bar from the chassis

    Click image to see an enlarged view

    Fig. Exploded view of the torsion bar

     

  4.  

To install:

  1. Install or connect the following:

    Torsion bar to the chassis. Torque the nut/bolt to 48 ft. lbs. (65 Nm) plus an additional 120 degree turn.
     
    Torsion bar to the knuckle. Torque the bolt to 51 ft. lbs. (69 Nm).
     

  2.  

 
label.common.footer.alt.autozoneLogo