Alero, Grand Am 1999-2005

Multi-Function (Combination) Switch

Print

Removal & Installataion



  1. Disable the SIR system, as outlined in the Chassis Electrical Section.
  2.  
  3. Remove the mounting screw (1) from the multifunction switch (2).

    Click image to see an enlarged view

    Fig. Remove the mounting screw (1) from the multifunction switch (2)

  4.  
  5. Remove the multifunction switch (1) from the column (2).
  6.  
  7. Disconnect the electrical connectors (3) from the multifunction switch (1).

    Click image to see an enlarged view

    Fig. Remove the multifunction switch (1) from the column (2), then disconnect the electrical connectors (3) from the multifunction switch (1)

  8.  

To install:

  1. Connect the electrical connectors to the multifunction switch (1).
  2.  
  3. Position the multifunction switch (1) on the steering column (2) while depressing the spring loaded horn pin.
  4.  
  5. Install the mounting screw (1) to the multifunction switch (2). Tighten the screw to 35 inch lbs. (4 Nm).
  6.  
  7. Enable the SIR system, as outlined in the Chassis Electrical Section.
  8.  
  9. Verify that the multifunction switch works properly.
  10.  

 
label.common.footer.alt.autozoneLogo