Altima 2007-2009

Removal & Installation

Print

Specific to:

Nissan Altima 2007-2008

  1. Open the glove box door (1), remove the glove box assembly screws (A).

    Click image to see an enlarged view

    Fig. Open the glove box door (1), remove the glove box assembly screws (A)

  2.  
  3. Remove the glove box assembly lower screws (A), then remove the glove box assembly.

    Click image to see an enlarged view

    Fig. Remove the glove box assembly lower screws (A), then remove the glove box assembly

  4.  
  5. Disengage the filter cover tab (1) to remove the filter cover.

    Click image to see an enlarged view

    Fig. Disengage the filter cover tab (1) to remove the filter cover

  6.  
  7. Remove the in-cabin microfilter from the blower unit by using the pull tab on the bottom of the filter.
  8.  
  9. Installation is the reverse of the removal procedure.
  10.  

Specific to:

Nissan Altima 2009-2010

  1. Remove the glove box assembly.
  2.  
  3. Disengage the filter cover tab to remove the filter cover.

    Click image to see an enlarged view

    Fig. Disengage the filter cover tab (1) to remove the filter cover

  4.  
  5. Remove the in-cabin microfilter from the blower unit by using the pull tab on the bottom of the filter.
  6.  

To install:

  1. Installation is in the reverse order of removal.
  2.  

 
label.common.footer.alt.autozoneLogo