Altima 2007-2009

Oil Pressure Switch

Print

Removal & Installation



  1. Remove undercover.
  2.  
  3. Disconnect oil pressure switch harness connector at the oil pressure switch. Remove oil pressure switch.
    CAUTION
    Do not drop or shock oil pressure switch.

  4.  
  5. Install the oil pressure switch as follows:
    1. Remove the old sealant adhering to oil pressure switch and engine.
    2.  
    3. Apply thread sealant and tighten the oil pressure switch to specification.
      NOTE
      Use Genuine High Performance Thread Sealant, or equivalent.

    4.  
    5. After warming up engine, make sure there are no leaks of engine oil with engine running.
    6.  

  6.  

 
label.common.footer.alt.autozoneLogo