Altima 2007-2009

Automatic Transaxle

Print

Drain & Refill



  1. Warm up CVT fluid by driving the vehicle for 10 minutes.
  2.  
  3. Drain CVT fluid from CVT fluid cooler hose (outlet side) and refill with new CVT fluid at CVT fluid charging pipe with the engine running at idle speed.
  4.  
  5. Refill until new CVT fluid comes out from CVT fluid cooler hose (outlet side).
    NOTE
    About 30 to 50% extra fluid will be required for this procedure.


    CAUTION



    Use only Genuine NISSAN CVT Fluid NS-2. Do not mix with other fluid.
     
    Using CVT fluid other than Genuine NISSAN CVT Fluid NS-2 will deteriorate in driveability and CVT durability, and may damage the CVT, which is not covered by the warranty.
     
    When filling CVT fluid, take care not to scatter heat generating parts such as exhaust.
     
    Delete CVT fluid deterioration date with CONSULT-III after changing CVT fluid.
     

  6.  
  7. Check fluid level and condition.
  8.  

 
label.common.footer.alt.autozoneLogo