Altima 2007-2009

Manual Transaxle

Print

Drain & Refill



Draining

Specific to:

Nissan Altima 2009-2010

  1. Start engine and let it run to warm up transaxle oil.
  2.  
  3. Stop engine and remove the drain plug to drain the oil.
  4.  
  5. Install the drain plug with a new gasket to the transaxle case. Tighten the drain plug to the specified torque.
    CAUTION
    Do not reuse gasket.

  6.  

Refilling

Specific to:

Nissan Altima 2009-2010

  1. Remove the filler plug and fill transaxle with new oil.
  2.  
  3. After refilling oil, measure oil level to check if it is within the specification using suitable gauge.
    CAUTION
    Do not start engine while checking oil level. Insert the suitable gauge straight and against the wall of the filler plug hole, then measure the gauge from the top of the filler plug hole to the oil level.

  4.  
  5. Install the filler plug with a new O-ring to the clutch housing.
    CAUTION
    Do not reuse O-ring.

  6.  
  7. Tighten filler plug bolt to the specified torque.
  8.  

 
label.common.footer.alt.autozoneLogo