Altima 2007-2009

High Voltage Vehicle Converter

Print

Removal & Installation




CAUTION
Before beginning service, thoroughly review ALL of the High Voltage (HV) system and general precautions at the beginning of this section. Failure to do so can result in serious personal injury or death.

  1. Disconnect the connectors from the HV relay assembly, as outlined in this section.
  2.  
  3. Remove the HV wire nut and HV wire from the HV vehicle converter.
  4.  
  5. Remove the ground wire nut and ground wire from the HV vehicle converter.
  6.  
  7. Remove the HV vehicle converter, as follows:
    1. Remove the HV vehicle converter nut and bolts from the HV vehicle converter.
    2.  
    3. Disconnect the connector from the back of the HV vehicle converter.
    4.  
    5. Remove the HV vehicle converter.
    6.  

  8.  
  9. Remove the clips and duct from the HV vehicle converter.
  10.  
  11. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Exploded view of the HV vehicle converter and related components

  12.  

 
label.common.footer.alt.autozoneLogo