Altima 2007-2009

Water Pump With Motor & Bracket Assembly

Print

Removal & Installation




CAUTION
Before beginning service, thoroughly review ALL of the High Voltage (HV) system and general precautions at the beginning of this section. Failure to do so can result in serious personal injury or death.

  1. Drain the coolant from the inverter cooling system, as outlined in this section.
  2.  
  3. Disconnect the water inlet hose and water outlet hose from the water pump with motor and bracket assembly.
  4.  
  5. Remove the bolts (A) from the water pump with motor and bracket assembly and remove from the vehicle.

    Click image to see an enlarged view

    Fig. Remove the bolts (A) from the water pump with motor and bracket assembly and remove from the vehicle

  6.  

To install:

  1. Installation is the reverse of the removal procedure. Do NOT use power tools during installation.

    Click image to see an enlarged view

    Fig. Exploded view of the water pump with motor and bracket assembly

  2.  

 
label.common.footer.alt.autozoneLogo