Altima 2007-2009

Locks & Lock Systems 2

Print

Power Door Locks



Removal & Installation
Door Lock Motor
Rear Door

Specific to:

Nissan Altima 2007-2008

  1. Remove the rear door window and rear door screen assembly.
  2.  
  3. Remove the rear door sash.
  4.  
  5. Remove door side grommet, and remove outside handle escutcheon bolt (TORX® T30) from grommet hole.

    Click image to see an enlarged view

    Fig. Remove door side grommet, and remove outside handle escutcheon bolt (TORX® T30) from grommet hole

  6.  
  7. While pulling the outside handle, remove outside handle escutcheon.

    Click image to see an enlarged view

    Fig. While pulling the outside handle, remove outside handle escutcheon

  8.  
  9. While pulling outside handle, slide toward rear of vehicle to remove outside handle.

    Click image to see an enlarged view

    Fig. While pulling outside handle, slide toward rear of vehicle to remove outside handle

  10.  
  11. Remove the front gasket and rear gasket.

    Click image to see an enlarged view

    Fig. Remove the front gasket and rear gasket

  12.  
  13. Remove the TORX® bolts (T30), remove the door lock assembly.

    Click image to see an enlarged view

    Fig. Remove the TORX® bolts (T30), remove the door lock assembly

  14.  
  15. Remove the TORX® bolt (T30), and remove the outside handle bracket.

    Click image to see an enlarged view

    Fig. Remove the TORX® bolt (T30) of the outside handle bracket

  16.  
  17. While pulling outside handle, slide toward rear of vehicle to remove outside handle.

    Click image to see an enlarged view

    Fig. While pulling outside handle bracket, slide toward rear of vehicle to remove outside handle bracket

  18.  
  19. Disconnect the door lock actuator connector and remove the door lock assembly.
  20.  
  21. Disconnect the outside handle cable from the outside handle bracket.

    Click image to see an enlarged view

    Fig. Disconnect the outside handle cable from the outside handle bracket



    Click image to see an enlarged view

    Fig. Exploded view of rear door lock assembly

  22.  

To install:

  1. Installation is in the reverse order of removal.
  2.  

Specific to:

Nissan Altima 2009-2010

  1. Remove the rear door finisher. Refer to Interior section for Door Trim Panel Removal and Installation.
  2.  
  3. Disconnect the inside handle knob cable and lock knob cable from the back side of the inside door handle.

    Click image to see an enlarged view

    Fig. Disconnect the inside handle knob cable and lock knob cable from the back side of the front door finisher

  4.  
  5. Remove the rear door sash.
  6.  
  7. Remove the rear door window and rear door screen assembly.
  8.  
  9. Remove door side grommet, and remove outside handle escutcheon bolt (TORX T30) from grommet hole.

    Click image to see an enlarged view

    Fig. Remove door side grommet, and remove outside handle escutcheon bolt (TORX T30) from grommet hole

  10.  
  11. While pulling the outside handle, remove outside handle escutcheon.

    Click image to see an enlarged view

    Fig. While pulling the outside handle, remove outside handle escutcheon

  12.  
  13. While pulling outside handle, slide toward rear of vehicle to remove outside handle.

    Click image to see an enlarged view

    Fig. While pulling outside handle, slide toward rear of vehicle to remove outside handle

  14.  
  15. Remove the front gasket and rear gasket.

    Click image to see an enlarged view

    Fig. Remove the front gasket and rear gasket

  16.  
  17. Remove the TORX bolts (T30), remove the door lock assembly.

    Click image to see an enlarged view

    Fig. Remove the TORX bolts (T30), remove the door lock assembly

  18.  
  19. Remove the TORX bolt (T30) (A) from the outside handle bracket.

    Click image to see an enlarged view

    Fig. Remove the TORX bolt (T30) (A) of the outside handle bracket

  20.  
  21. While pulling outside handle, slide toward rear of vehicle to remove outside handle.

    Click image to see an enlarged view

    Fig. While pulling outside handle bracket, slide toward rear of vehicle to remove outside handle bracket

  22.  
  23. Disconnect the door lock actuator connector and remove the door lock assembly.
  24.  
  25. Disconnect the outside handle cable from the outside handle bracket.

    Click image to see an enlarged view

    Fig. Disconnect the outside handle cable from the outside handle bracket connection

  26.  

To install:

Click image to see an enlarged view

Fig. Exploded view of rear door lock assembly

  1. Installation is in the reverse order of removal.
  2.  

Door Lock Switch

Specific to:

Nissan Altima 2007-2008

  1. Remove the power window main switch finisher.
  2.  
  3. Power window main switch is removed from power window main switch finisher using a suitable tool.
    CAUTION
    Do not fold the pawl of power window main switch finisher.


    NOTE
    The same procedure is also performed for front power window and door lock/unlock switch RH, and rear power window switch (LH & RH).



    Click image to see an enlarged view

    Fig. Power window main switch (1) is removed from power window main switch finisher (2) using a suitable tool (A)

  4.  

To install:

  1. Installation is in the reverse order of removal.
  2.  

Specific to:

Nissan Altima 2009-2010

  1. Remove the power window main switch finisher.
  2.  
  3. Power window main switch is removed from power window main switch finisher using a suitable tool.
    CAUTION
    Do not fold the pawl of power window main switch finisher.


    NOTE
    The same procedure is also performed for front power window and door lock/unlock switch RH, and rear power window switch (LH & RH).



    Click image to see an enlarged view

    Fig. Power window main switch (1) is removed from power window main switch finisher (2) using a suitable tool (A)

  4.  

To install:

  1. Installation is in the reverse order of removal.
  2.  

 
label.common.footer.alt.autozoneLogo