Altima 2007-2009

Flushing

Print

  1. Fill the radiator from the filler neck above the radiator upper hose and reservoir tank with clean water and reinstall the radiator filler cap.
  2.  
  3. Run the engine until it reaches normal operating temperature.
  4.  
  5. Rev the engine two or three times under no-load.
  6.  
  7. Stop the engine and wait until it cools down.
  8.  
  9. Drain the water from the system.
  10.  
  11. Repeat steps 1 through 5 until clear water begins to drain from the radiator.
  12.  

 
label.common.footer.alt.autozoneLogo