Aspen 2007, Durango 2005-2007

Removal & Installation

Print

  1. Disconnect and isolate the negative battery cable.
  2.  
  3. Remove the right front door sill trim panel.
  4.  
  5. Remove the right side interior cowl trim cover.
  6.  
  7. Disconnect the wire harness connector from the blower motor.
  8.  
  9. Remove the three screws that secure the blower motor and blower wheel assembly to the HVAC (Heater, Ventilation and Air Conditioning) housing.
  10.  
  11. Remove the blower motor and blower wheel assembly from the HVAC housing.
  12.  

To install:

  1. Position the blower motor and blower wheel assembly into the HVAC housing.
  2.  
  3. Install the three screws that secure the blower motor and blower wheel assembly to the HVAC housing. Tighten the screws to 2.2 Nm (20 inch lbs.).
  4.  
  5. Connect the wire harness connector to the blower motor.
  6.  
  7. Install the right side interior cowl trim cover.
  8.  
  9. Install the right front door sill trim panel.
  10.  
  11. Reconnect the negative battery cable.
  12.  

  1. Disconnect and isolate the negative battery cable.
  2.  
  3. Remove the right front door sill trim panel.
  4.  
  5. Remove the right side interior cowl trim cover.
  6.  
  7. Disconnect the wire harness connector from the blower motor.
  8.  
  9. Remove the three screws that secure the blower motor and blower wheel assembly to the HVAC (Heater, Ventilation and Air Conditioning) housing.
  10.  
  11. Remove the blower motor and blower wheel assembly from the HVAC housing.
  12.  

To install:

  1. Position the blower motor and blower wheel assembly into the HVAC housing.
  2.  
  3. Install the three screws that secure the blower motor and blower wheel assembly to the HVAC housing. Tighten the screws to 20 inch lbs. (2.2 Nm).
  4.  
  5. Connect the wire harness connector to the blower motor.
  6.  
  7. Install the right side interior cowl trim cover.
  8.  
  9. Install the right front door sill trim panel.
  10.  
  11. Reconnect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo